Facebook TwitterGoogle Plus WhatsApp
Product detail...
Emitor Combolook Color HD DVB S2/ T2 Spectrum Analyzer Sat Meter
Previous 1 of 2 Next
Emitor Combolook Color HD DVB S2/ T2 Spectrum Analyzer Sat Meter
The COMBOLOOK COLOR HD S2 T2C is a Swedish made SAT-TV/TV instrument and spectrum analyzer. This unit is made for exact alignment and adjustment of satellite dishes and aerial antennas. It is also an excellent tool for working with Cable TV networks. It is intended for professional use when high accuracy and precise information is required. It´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to grasp and take just minutes to learn.

The COMBOLOOK COLOUR HD S2/T2/C is able to work with the return-path signals in Cable-TV networks (5-65 MHz) according to the EN50083 standard. The TV-part presents the full range spectrum of 2-900 MHz which can be zoomed into smaller parts (min 13 MHz-span).

The TV-part is very sensitive and accurate. It presents signals ±1dB (at +20° C). There is a built in DVB-T receiver showing picture and BER + S/N-values. The SAT-part also has very high resolution and accuracy. It presents measured data ±1½ dB (at 20° C). The Sat-TV spectrum can be expanded (zoom in) for correct adjustment of the polarisation (“cross-polarisation”).

The SAT-part presents, under one of the sub menus, digital information like BER (bit error rate), constellation-diagram (QPSK and 8PSK) and S/N (signal/noise ratio). The NIT function of the SAT-part can identify the various TV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio-channels. The unit has a built in DVB-receiver which can store up to 100 Free To Air DVB-S channels in a favourite channel-list.

The COMBOLOOK COLOR HD HD S2/T2/C can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analog and digital transponders). The power of the instrument is supplied by a built in and rechargeable battery. The instrument is provided with a 5” color 16:9 LCD-monitor. Menus/help-displays are shown on the LCD screen (64x128) beside the monitor.


Spectrum-analyzer 2-900MHz and 950-2150MHz
Presents full range and expanded spectrum
Very high accuracy, CATV +/-1dB, SAT-TV +/- 1.5dB at 20°C
Digital BER, MER and S/N(C/N)-ratio (DVB-S and S2, DVB-T and T2)
DVB-S FTA receiver with picture
DVB-T FTA receiver with picture
DVB-C FTA receiver with picture
Automatic Satellite identifcation
Readout of NIT - gives SAT ID and TV/Radio-channel info
Digital BER and S/N-ratio (DVB-S, S/2 and DVB-T)
QPSK and 8PSK constellation diagram
DVB-S (Free to Air) and SAT-analog TV-picture
Aerial power output, 0, 6, 12, 18 and 24V
LNB voltage 13/18V, 22KHz tone switch
Unicabel SatCR
DiSEqC according to level 1.0, 1.1 and 1.2
Lots of memory positions for spectrum pictures
RS232 for PC-connection (up/download)
Rechargeable Li-Ion battery
Nice & small, only 4Kg complete with carrying case

Technical Specification:

Input frequency: 5-900 MHz and 920-2150MHz
Sat-TV min level in: About 35 dBuV (noise)
Sat-TV max level in: About 90 dBuV
TV-part max input level, picture: 110 dBμV
Spectrum: 120 dBμV
Sat-TV attenuation: 15 dB attenuator on/off
TV-part: attenuation: 45 dB in 1 dB step
Display of signal level (analog): dB on LCD/monitor
Sat-TV accuracy: ±1½ dB (at +20° C)
TV-part accuracy: ±1 dB (at +20° C)
TV-part resolution bandwidth: 1 MHz or 300 kHz
TV-part video bandwidth: 100, 10 ,1 kHz or 100Hz
DVB-S/S-2 Digital display of signallevel: S/N (signal/noise-ratio) BER (bit errorrate) Constellation (QPSK and 8PSK)
Satellite-indentification: Yes, by reading out the NIT in the bitstream
Info about TV and Radio channels
TV standard: Multi TV/ (PAL, NTSC, SECAM)
TV text-TV (CEEFAX): Yes
KU- C-band: Yes, selectable
Input impedance: 75 Ohm, F-con
Picture-screen: 5” 16:9 TFT-LCD monitor
Menus: On LCD 64x128
Memory: Lots of spectrum pictures can be stored with name
Stored spectrum can be mixed for easy identification of satellite
“Maxhold” function
Favourite channels: Both analog and digital frequencies can be stored (with name)
100 DVB-S Free to Air channels can be stored in a favourite channel list
DVB-T channels can be stored and viewed upon
PC-connection: RS-232output and PC-software
Sat-TV power out: Yes, 13-18V
TV power out: On/Off - 5 volt and 15-24 volt
Sat-TV control: 22 kHz, DiSEqC SatCr (UniCable)
DiSEqC Yes, all 1.0 and 1.1. 1.2
DiSEqC actuator: Built in positioner for DiSEqC 1.2,Toneburst on/off
Battery: Rechargable 12v, 3.5 amp/hour
Weight: About 4 kg incl battery

Nylon carrying-case
Power-supply of 220v/13.5v, 1.7amp
Auto Adapter cord (Car charger) 12V

Download Leaflet     Download English user manual  
Price: £1,295.95
« Previous | Next »
Product Reviews

No Reviews For This Product.

Click to review this product

Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout
Login Status  Login Status

Not logged in

» Login