Facebook TwitterGoogle Plus WhatsApp
Product detail...
Emitor Digiair Pro DVBT Aerial TV Terrestrial Meter
Previous 1 of 2 Next
Emitor Digiair Pro DVBT Aerial TV Terrestrial Meter
The new Emitor´s DIGIAIR Pro DVB-T is developed in Sweden for exact alignment and adjustment of terrestrial antennas. This is made for both analog (dBuV) and digital (BER and SNR). DIGIAIR Pro is microprocessor controlled, making it very reliable and accurate.

Signal strength is presented on the LCD-display. In analog mode it shows a single channel or six channels at the same time. You can also choose to view the signal in spectrum mode. In digital mode it displays the BER (bit error rate) and SNR (signal/noice ratio). Readout of UCB (uncorrected bits) and CB (corrected blocks) is also easy to do. Furthermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on a loudspeaker. DIGIAIR Pro is very sensitive and can detect even the weakest signals.

DIGIAIR Pro can feed Voltage (5/12 Volt) to external active antennas this feature is short-circuit protected by an automatic fuse. DIGIAIR Pro is charged via an external DC power-source of 13,5 -18 volt. The DIGIAIR Pro operates with 8xAA rechargeable batteries. The unit will works for at least 2 hours with fully charged batteries. Even though the DIGIAIR Pro has a lot of functions it is still very easy to use and has a very compact design.


Perfect for digital terrestrial installations (COFDM)
Frequency range of 45-860MHz
Easy digital readout of BER and SNR
Very sensitive, easy to maximize weak and strong signals
Analoge signal level reads out in dBuV
Presents one channel readout with high resolution or six
channels simultaneously or the complete spectrum
Built in beeper (pitch tone) and maxhold function
Aerial power output, 0V, 5V, 12V and 24V
Built in, rechargeable battery
Power supply and car-charger enclosed
Carrying-case enclosed
Small and handy design
Made in Sweden

Technical specification:

Input frequency: 45-860 MHz.
Input level: 30-80 dBuV.
Input impedance: 75 Ohm, F-connector.
Short circuit protection: Automatic fuse on antennainput.
Measuring method: in digital Two bars showing BER (bit error rate) and SNR (Signal/noice ratio)
in Analog: One bar showing dBuV in high resolution or 6 bars showing strength of 6channels. Spectrum display. Pitch tone beeper
Signal-level readout: digital BER and SNR values.
analog: dBuV with maxhold-function.
Power out: 0V, 5V,12V and 24V on/off.
Power supply/charger: 10 -18V DC (Centerpin +).
Display: Back-lighted 128x64 Pixels LCD.
Power consumption: 500mA.
Battery: 8x AA rechargeable batteries of 1200mA each.
Weight: 0.3 kg.
Dimensions: 185 x 115 x 50 mm.
Accessories: Powersupply 12V DC, 1A, Rubber-case, Car charger.

The unit will works for at least 2 hours with fully charged batteries.


Price: £299.95
Product Reviews

No Reviews For This Product.

Click to review this product

Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout
Login Status  Login Status

Not logged in

» Login