Facebook TwitterGoogle Plus WhatsApp
Product detail...
 Checkout
Emitor Satlook Micro HD NIT Spectrum  DVB S2 Satellite Meter
Previous 1 of 3 Next
Emitor Satlook Micro HD NIT Spectrum DVB S2 Satellite Meter

The EMITOR SATLOOK MICRO HD is a swedish made SAT-TV instrument. The unit is made for exact alignment and adjustment of SD and HD satellite-dishes.

It is intended for professional use and measure both SD and HD signals, DVB-S (QPSK) and DVB-S2 (8PSK).

The "EasyFind"-function makes it very easy to find and maximize a specific satellite (chosed from a list). In this mode the meter will use its full capacity to search only for unique parameters of that satellite. This will help the installer to make very fast and accurate installations. The "Easyfind"- mode also recall the last selection used when powered up.

It´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to get a hold on and takes only minutes to learn.

The instrument is provided with a 3" LCD which either shows Sat-signal strength or Digital information.

The EMITOR SATLOOK MICRO HD is unique as it can measure satellite signal from two LNBs at the same time. Signalstrength is presented graphical on the LCD-display in form of thermometer scales. It can present pitchtones (the higher tone the better signal) on a loudspeaker.

This second generation of the MICRO, HD, can also present the Satellite spectrum, freq: 950-2150 MHz in different steps of resolution.

Further more the SATLOOK MICRO HD show Digital information like BER (bit error rate), MER (Modulation error rate), constellation-diagram (QPSK & 8PSK) and S/N (signal/noise ratio).

The NIT function can identify the various TV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio-channels.

SATLOOK MICRO HD can store up to 99 positions of Satellite transponder information. The instrument can easily scan through the memory positions and identify the various Satellite transponders.

The polarisation of the LNB is switchable 13V/18V and the Hi-Lo band with 22 kHz-tone. The DiSEqC-function controls all DiSEqC-accessories (like switches, LNB´s and actuators). The power of the instrument is supplied by a built in and rechargeable battery. Even though the instrument has a lot of functions it is still very light and flexible.

Technical specification.

 

Input frequency:

920-2150MHz.
Sat-TV min level in: About 35 dBuV (noise).
Sat-TV max level in: About 100 dBuV.
Input/output impedance: 75 Ohm, F-connectors.
Measuring method (analog): Spectrum analyzer Signal presentation on LCD -display in form of thermometer scales. Pitch-tone, highest tone on loud­speaker.
Measuring method (Digital): BER (bit error rate) MER (Modulation error rate) SNR (signal/noise-ratio) Constellation (QPSK & 8PSK)
Max-level:

Thermometer scales showing max. Maxhold function. BER, MER, SNR, QPSK and 8PSK

Satellite-identification:

Yes, by reading out the NIT in the bitstream. Info about the TV and Radio channels.

Memory: Up to 99 transponders can be stored with name.
Memory search:

The instrument scans the memory positions and presents the matching transponders.

Presentation: On LCD 3”

PC-connection:
Power out:
22 kHz tone:
DiSEqC:

Yes, RS232-output
Yes, 13-18V.
Yes, on/off.
Yes, all 1.0 and 1.1. Also
Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and SatSelect.
Battery: Rechargable 12v, 3.5amp/hour.
Operational: About 1 hour on a fully charged Battery.
Weight: 1.5kg incl.battery & carrying case

Accessories:
Nylon carrying case.
Power-supply of 230V13.5V,1.7A
Manual
Car Charger
RS232 Cable ( USB to RS232 not included)

Download Leaflet     Download English user manual     Download French user manual

Price: £439.95
:
Quantity:
 
Product Reviews

No Reviews For This Product.

Click to review this product

Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout
Login Status  Login Status

Not logged in

» Login